News

  • Common Materials and characteristics of Hammer head of Hamme

    Common Materials and characteristics of Hammer head of Hamme

    1, high manganese steel hammer head The high manganese steel is characterized by good toughness, good technological performance and low price. Its main feature is that the surface layer will rapidly produce work hardening under the action o... ...More>>

    2019-03-14
  • Removal of elbow plate of jaw crusher

    Removal of elbow plate of jaw crusher

    Jaw crusher is the most frequent replacement is thrust plate, namely elbow plate. The crusher of the integral connecting rod must remove the thrust plate, first unscrew the baffle bolt, cut off the dry oil lubrication tubing, and hang the t... ...More>>

    2019-03-12
  • Basic principles of Ball grading in Ball Mill

    Basic principles of Ball grading in Ball Mill

    1, To deal with the ore with large hardness and coarse grain size, it is necessary to have a greater impact force, and to load a larger steel ball, that is, the harder the material is, the larger the diameter of the steel ball is; 2, the di... ...More>>

    2019-03-11
  • Influence factors of &CH890 capacity and performance of

    Influence factors of &CH890 capacity and performance of

    Cone crusher is usually a component of crushing and screening process. The design and operation of the crusher performance depends on the entire process, including conveyor, feeder, feeding tube, site design and structure. In addition, the... ...More>>

    2019-02-11
  • Impact Crusher Common Fault

    Impact Crusher Common Fault

    To counter the common fault of impact crusher has many kinds, so the exclusion method is different. The following four common troubleshooting methods are provided: First, if the crusher (counterattack crusher) abnormal vibration: 1, indicat... ...More>>

    2019-02-11
  • Malfunction and troubleshooting of hammer crusher

    Malfunction and troubleshooting of hammer crusher

    1. Bearing overheating Reason: insufficient grease; excessive grease; grease dirty deterioration; bearing damage. Elimination method: add proper amount of grease; the internal grease of bearing should be 50% of its space volume; clean beari... ...More>>

    2019-02-11