How to reduce the wear of lining plate of cone crusher
Author:xixi Addtime:2019-07-22 Click:
1. Considerations in use
During the operation of the cone crusher, the materials in the equipment must conform to the requirements of crushing. It is strictly forbidden that the hardness is too large, the moisture content is too high or other non-broken materials enter into the crushing chamber, otherwise, the liner will fall off, the equipment will stop, and so on. At the same time, the feed of cone crusher must be uniform, the ore must be given in the middle of the distribution plate, the material can not act directly with the lining plate, so as to prevent the lining board from wearing out unevenly.
2. Precautions for replacing linings
When replacing the lining of cone crusher, the wear of fixed cone, adjusting ring, locking thread, counterweight and counterweight plate must be checked.If serious wear should be replaced, the liner should be installed again, which can reduce the time of secondary replacement and disassembly, and save time and effort.After the liner is installed, check if the center of the liner is positive, otherwise the liner will collide in the operation process, resulting in serious wear of the liner.
3. Notice when selecting material
With the development of science and technology , the performance of the wear - resistant material is also increasing . As a whole , it is necessary to select the material which can quickly harden on the surface under the action of impact load , so as to form both a hard and wear - resistant surface , while still maintaining the original toughness of the inner metal . This can improve the service life of the crushing wall and the rolling mortar wall .
Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd, specializing in the production of domestic and foreign brands of crusher wear spare parts manufacturers, production of domestic brands, Hua Yang, Shan Bao, SBM brands such as crusher wear parts, spare parts, as well as foreign brands, Sandvick, TEREX and other import brands crusher spare parts, wear parts, mining quarry companies such as crusher wear parts of choice. We achieve cost-effective localization of imported spare parts, service users at home and abroad. The company can be matched with various brands of hydraulic crusher electric parts, sealing parts, standard parts and other accessories, can meet the needs of one-stop shopping for customers at home and abroad the demand.
Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd has thirty years of production experience, and years of experience in processing export products, products have been exported to the United States, Canada, Australia, Sweden, Finland, Russia, Ukraine and Southeast Asia and other countries and regions. Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd product using the original material, high-quality raw materials, casting and heat treatment process we have a unique thirty years production experience, to ensure complete interchangeability, and original spare parts with high quality and competitive price, provide quality products, quality services for the majority of users.
Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd wearable parts can be customized to map, and if there is no map, the company has professional mapping personnel to help you mapping, after customization
Contact:Sales Director: Eileen Cai ;
Email: sales@qrcrusher.com;
Mobile telephone: +8618973821771
