How to choose the cone liner of cone crusher?

The liner of the cone crusher is easily worn out because of the strong impact. This will lead to uneven product size, reduced production efficiency and increased energy consumption, so the replacement of crusher linings is very important.

 

The following three factors are generally taken into account when selecting the cone liner: output, power consumption, and wear resistance of the liner. Generally according to the following principles: maximum feed size, particle size change, feed size distribution, material hardness, material wear resistance. The longer the liner, the higher the power consumption. Hard material select short liner, soft material select long liner: thin material select short liner, coarse material select long liner. Generally speaking, the material smaller than the closed side discharge port can not exceed 10, if more than 10, the power consumption increases, and the product granularity becomes flake. An increase in the water content of a viscous material will affect the throughput of the material, as far as the moisture content of the material is concerned Generally speaking, not more than five. Standard cone crusher should reach 75 and 80, short cone crusher should reach 80 and 85.

 

Material of cone crusher liner at present, the material used in cone crusher liner is high manganese steel.According to the investigation of the service life of the cone liner of some cone crushers installed in China, the service life of the cone liners used in various factories and mines is very different, which is caused by the difference of ore properties and crusher loads. The materials used in the production process of a factory are in accordance with the national production standards and can withstand wear and tear.

                  [ Click to view cone crusher parts introduction](/categories/cone-crusher-parts/)

Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd, specializing in the production of domestic and foreign brands of crusher wear spare parts manufacturers, production of domestic brands, Hua Yang, Shan Bao, SBM brands such as crusher wear parts, spare parts, as well as foreign brands, common, Sandvik, TEREX and other import brands crusher spare parts, wear parts, mining quarry companies such as crusher wear parts of choice. We achieve cost-effective localization of imported spare parts, service users at home and abroad. The company can be matched with various brands of hydraulic crusher electric parts, sealing parts, standard parts and other accessories, can meet the needs of one-stop shopping for customers at home and abroad the demand.

Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd has thirty years of production experience, and years of experience in processing export products, products have been exported to the United States, Canada, Australia, Sweden, Finland, Russia, Ukraine and Southeast Asia and other countries and regions. Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd product using the original material, high-quality raw materials, casting and heat treatment process we have a unique thirty years production experience, to ensure complete interchangeability, and original spare parts with high quality and competitive price, provide quality products, quality services for the majority of users.

Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd wearable parts can be customized to map, and if there is no map, the company has professional mapping personnel to help you mapping, after customization

Contact:Sales Director: Eileen Cai ;

      Email: sales@qrmech.com;

      Mobile telephone: +8618973821771