How To Use And Maintain Double Toothed Roller Crusher Better

First, the use of double toothed roller crusher

 

After the double toothed roller crusher is put into use, in order to ensure the safe operation and make full use of its best performance, it must be regularly maintained according to the requirements and form a system

 

1, the crusher must be started without load

 

2, check the connection of the gear plate every day, do not allow loosening or losing at work. Check the temperature of the bearing regularly. It is not allowed to work at higher than 120 degrees centigrade. When the temperature is higher than 80 degrees, you should check the bearings and other parts

 

3, the degree of tooth wear is inspected once a day, when the serious wear and tear, should be complete replacement, to ensure that the broken tooth roller shaft running balance

 

4, regularly check the reducer's oil temperature, oil level and oil pollution, the reducer oil temperature should be less than 90 degrees, and found that the oil temperature is too high, the oil level is too low and oily serious pollution, should be timely inspection, oiling or oil

 

5, in a timely manner to the hydraulic coupler after injection spray and replacement of the fusible plug.

 

6, regular inspection of insulation and wiring head connection, cable damage must be replaced; wiring head loose, must be re tightened

 

7, avoid foreign objects into the crusher

 

8 all operations and inspections shall comply with the requirements of the safety regulations issued by the safety management of coal

 

Two, check every shift

 

1, check whether the operation of the broken shaft group is normal and the degree of wear of the broken teeth

 

2, check whether the motor belt drive is running properly

 

3, check the gear reducer for oil leakage, whether there is any abnormal sound and vibration, the oil temperature in the box shall not exceed 90 degrees, and whether the oil level is insufficient

 

4, eliminate the reducer and the connection cover sundry, in order to heat dissipation

 

5 check all hydraulic hoses and hoses for damage and leakage

 

6 check all cables for reliability and wear or damage

 

7, check whether the crusher has obvious faults or problems

    

            [click to see the double roller crusher parts](/products/Roll_mill_liner/)

 

Three, daily inspection

 

1 repeat the inspection items per shift

 

2, check whether the connecting bolts of the transmission are firm and reliable

 

3 ensure that no material is piled up

 

Four, check weekly

 

1 repeat daily inspection items

 

2, check whether the driving parts of the double toothed roller crusher are safe and reliable, whether or not there is any damage. Check the fasteners, loosen them, and replace the damaged ones

 

Five, monthly check

 

1 repeat the weekly inspection items

 

Six, check every half year

 

1, release all the reducer oil, clean the inside and replace the new oil

 

2, at any time, reducer and crushing shaft group can not be taken apart in the pit repair, in case of emergency, we must open the pit repair, we must have dust-proof, anti foreign objects and other protective measures to ensure safe use

 

Seven, check every face

 

1 check whether the crusher is damaged or worn

 

2, check if the reducer needs to be overhauled

 

3, check if the motor needs to be overhauled

 

4, check whether the broken tooth has enough life to complete the new surface broken

Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd, specializing in the production of domestic and foreign brands of crusher wear spare parts manufacturers, production of domestic brands, Hua Yang, Shan Bao, SBM brands such as crusher wear parts, spare parts, as well as foreign brands, common, Sandvik, TEREX and other import brands crusher spare parts, wear parts, mining quarry companies such as crusher wear parts of choice. We achieve cost-effective localization of imported spare parts, service users at home and abroad. The company can be matched with various brands of hydraulic crusher electric parts, sealing parts, standard parts and other accessories, can meet the needs of one-stop shopping for customers at home and abroad the demand.

Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd has thirty years of production experience, and years of experience in processing export products, products have been exported to the United States, Canada, Australia, Sweden, Finland, Russia, Ukraine and Southeast Asia and other countries and regions. Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd product using the original material, high-quality raw materials, casting and heat treatment process we have a unique thirty years production experience, to ensure complete interchangeability, and original spare parts with high quality and competitive price, provide quality products, quality services for the majority of users.

Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd wearable parts can be customized to map, and if there is no map, the company has professional mapping personnel to help you mapping, after customization

Contact:Sales Director: Eileen Cai ;

      Email: [email protected];

      Mobile telephone: +8618973821771