Safety Operation Of common Cone Crusher HP200&HP300

One, check before driving:

 

1, check whether the oil in the tank is sufficient, whether there is water or impurities in the oil

 

2, start the pump, check whether the oil pump, oil pipe meets the requirements, whether there is oil leakage and tubing blockage

 

3, check whether the dust protection facilities are complete, whether the water pipe is unobstructed, and whether the dustproof effect is good or not

 

4, check the broken chamber for minerals and other debris, such as found in a timely manner excluded

 

5, check whether the discharge hopper conforms to the requirement of use and whether the screw is loose or not

 

6 check whether the electrical accessories are complete and whether the switches are in the parking position

 

7, check whether there is any obstacle to the operation of the equipment around the equipment

 

Two, driving notes:

 

1, received the next process permits to drive the signal, you can operate in accordance with the order in order to drive the car, first open the pump, to be installed after the pump is normal, and then open the main equipment

 

2, before the equipment starts, check whether there are any work or obstacles around it

 

3, after starting the equipment, you should check the circulation of lubricating oil and the operation of other parts in detail

 

4, after checking to confirm that the machine can operate normally, you can notify the previous process to drive to the mine

 

5, check the size of ore discharge and dust prevention facilities meet the requirements, if there is discomfort, should be adjusted immediately

 

Three, running inspection:

 

1, check whether the normal hydraulic oil temperature, oil pressure should be maintained at C /Mpa square meters, the oil return temperature does not exceed 55 degrees, the inlet temperature does not exceed 45 degrees.

 

2, check whether the equipment is normal, pay attention to the motor temperature rise and current fluctuations, no overload operation

 

3, check the Department screw in the operation of the equipment is loose and fall phenomenon, whether the fixed lining plate signs of loosening, the sound of the Department is normal

 

4, check whether the equipment belongs to the oil leakage

 

5, often check whether the ore size meets the requirements, to discharge ore funnel is smooth, found problems solved in a timely manner

 

6, it is strictly prohibited to pull the brakes with the load. The major accidents are not covered by this restriction, but the site must be protected.

                      [Click to view cone crusher parts introduction](/categories/cone-crusher-parts/)



Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd, specializing in the production of domestic and foreign brands of crusher wear spare parts manufacturers, production of domestic brands, Hua Yang, Shan Bao, SBM brands such as crusher wear parts, spare parts, as well as foreign brands, common, Sandvik, TEREX and other import brands crusher spare parts, wear parts, mining quarry companies such as crusher wear parts of choice. We achieve cost-effective localization of imported spare parts, service users at home and abroad. The company can be matched with various brands of hydraulic crusher electric parts, sealing parts, standard parts and other accessories, can meet the needs of one-stop shopping for customers at home and abroad the demand.

      

Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd has thirty years of production experience, and years of experience in processing export products, products have been exported to the United States, Canada, Australia, Sweden, Finland, Russia, Ukraine and Southeast Asia and other countries and regions. Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd product using the original material, high-quality raw materials, casting and heat treatment process we have a unique thirty years production experience, to ensure complete interchangeability, and original spare parts with high quality and competitive price, provide quality products, quality services for the majority of users.

 

Shuangfeng Qirun Machinery Parts IMP&EXP Co.,Ltd wearable parts can be customized to map, and if there is no map, the company has professional mapping personnel to help you mapping, after customization

 

Contact:Sales Director: Eileen Cai ;

      Email: sales@qrmech.com;

      Mobile telephone: +8618973821771