Toggle Navigation
QIRUN MACHINERY is a professional manufacturer of CRUSHER WEAR PARTS,The products are made of high-quality raw materials, through scientific and reasonable ratio of elements (molybdenum, manganese, ra
| Part Type | Cone Crusher Parts |
| Lead Time | 15-30 days (standard, MTR included) |
| MOQ | 1 piece (trial order accepted) |
QIRUN MACHINERY is a professional manufacturer of CRUSHER WEAR PARTS,The products are made of high-quality raw materials, through scientific and reasonable ratio of elements (molybdenum, manganese, rare earth lanthanum, etc.), melting in medium frequency furnace, forming once, and then through a series of heat treatment processes (heat treatment temperature reaches 1045 degrees), the toughness and wear resistance of the products can reach 1.2 to 1.5 times that of similar products.Our products have been widely used in mining, metallurgy, thermal power, cement, sand mining, gold panning and other industries
Specifications
1. crusher lining for aggregates,mining,Quarry
2. Durabale Performance
3. Mantle and concave (bowl liner)
4.High Manganese Steel (Mn13Cr2, Mn18Cr2, Mn22Cr2 and customised material)
4. Aftermarket available
5.Lead time:25-35days.
6.Over 30years experience
Material:
1).High Manganese steel Casting:
Mn13, Mn18, Mn22, Mn13Cr2, Mn18Cr2, Mn22Cr2, Mn13CrMo,Mn13CrMoNi…
2).High Chrome Steel:
Cr13, Cr15, Cr18, Cr20, Cr25, Cr27, Cr15Mo1, Cr18Mo1,
Cr25Mo0.5Ni0.5…
3).Any other material as customer’s requirement.
Trusted by customers in 30+ countries. Standard lead time 15-30 days.
High manganese steel Mn13, Mn13Cr2, Mn18Cr2 and Mn22Cr2, plus high chrome iron (Cr26) for fine crushing. We select the material based on your abrasive and impact conditions - send your working conditions for a recommendation.
Aftermarket parts fit Metso (HP, GP, C, NP series), Sandvik (CH, CS, H, S series), Symons 2FT-7FT, Terex Pegson, Kleemann, McCloskey, Shanbao, SBM, Telsmith, Minyu, Hazemag and more. Any model can be custom made by drawing or sample.
Yes. Send a drawing (PDF, DWG or CAD) or a used sample. We measure, draft and confirm all dimensions with you before production. OEM part numbers are welcome for reference.
Standard lead time is 15-30 days and samples ship in 7-15 days. MOQ is flexible - trial orders from 1 piece are accepted.
ISO 9001 certified factory (Kaixin Certification, CNAS-accredited; certificate valid through June 2028). Every shipment includes a Material Test Report (MTR) with chemical composition and mechanical properties.
Export-standard wooden crates with rust protection. Sea and air freight from Shanghai and Ningbo ports to worldwide destinations.
| Material | Initial Hardness | Best For |
|---|---|---|
| Mn13 (ASTM A128) | HB 200-230 | General crushing with medium impact |
| Mn13Cr2 | HB 210-240 | Standard jaw plates and cone liners |
| Mn18Cr2 | HB 220-250 | High-impact, abrasive feed |
| Mn22Cr2 | HB 230-260 | Severe impact, hard and large rock |
| High Chrome Cr26 | HRC 58-62 | Blow bars, fine crushing of abrasive material |
* High manganese steel work-hardens under impact to 500+ HB at the wearing surface, giving long life in hard-rock crushing.
Send us your crusher model, quantity or part number.
Interested in this product? Fill out the form below and we'll respond within 24 hours.
