Toggle Navigation
The I-C13 Impactor is a self contained tracked machine built to withstand the rigours and conditions of operating in quarries and within the construction industry. The I-C13 Impactor utilises a diesel
| Part Type | Impact Crusher Parts |
| Lead Time | 15-30 days (standard, MTR included) |
| MOQ | 1 piece (trial order accepted) |
The I-C13 Impactor is a self contained tracked machine built to withstand the rigours and conditions of operating in quarries and within the construction industry. The I-C13 Impactor utilises a diesel engine to provide the power to the hydraulic power pack and to generate electricity for the electrical systems of the machine. The tracks, feeders, impactor box, conveyors and all other working parts of the machine are hydraulically driven. Where possible all of the moving parts of this machine are guarded, where not, warnings are provided. The Safety Section of this manual must be read and fully understood. Any residual organisational, personal and environmental issues must be fully addressed as detailed in the safety section.
When come to FW Casting, we had success to casting the I-C13 impactor parts (blow bars). By using new casting technology and new material, our extec impact crusher replacement parts can get more longer span-life in any condition.
Trusted by customers in 30+ countries. Standard lead time 15-30 days.
High manganese steel Mn13, Mn13Cr2, Mn18Cr2 and Mn22Cr2, plus high chrome iron (Cr26) for fine crushing. We select the material based on your abrasive and impact conditions - send your working conditions for a recommendation.
Aftermarket parts fit Metso (HP, GP, C, NP series), Sandvik (CH, CS, H, S series), Symons 2FT-7FT, Terex Pegson, Kleemann, McCloskey, Shanbao, SBM, Telsmith, Minyu, Hazemag and more. Any model can be custom made by drawing or sample.
Yes. Send a drawing (PDF, DWG or CAD) or a used sample. We measure, draft and confirm all dimensions with you before production. OEM part numbers are welcome for reference.
Standard lead time is 15-30 days and samples ship in 7-15 days. MOQ is flexible - trial orders from 1 piece are accepted.
ISO 9001 certified factory (Kaixin Certification, CNAS-accredited; certificate valid through June 2028). Every shipment includes a Material Test Report (MTR) with chemical composition and mechanical properties.
Export-standard wooden crates with rust protection. Sea and air freight from Shanghai and Ningbo ports to worldwide destinations.
| Material | Initial Hardness | Best For |
|---|---|---|
| Mn13 (ASTM A128) | HB 200-230 | General crushing with medium impact |
| Mn13Cr2 | HB 210-240 | Standard jaw plates and cone liners |
| Mn18Cr2 | HB 220-250 | High-impact, abrasive feed |
| Mn22Cr2 | HB 230-260 | Severe impact, hard and large rock |
| High Chrome Cr26 | HRC 58-62 | Blow bars, fine crushing of abrasive material |
* High manganese steel work-hardens under impact to 500+ HB at the wearing surface, giving long life in hard-rock crushing.
Send us your crusher model, quantity or part number.
Interested in this product? Fill out the form below and we'll respond within 24 hours.
